That message indicates an issue with the driver and cable, not the software. https://www.miklor.com/COM/UV_ErrorMess.php
Stay safe and healthy. John 'Miklor' K3NXU From: [email protected] [mailto:[email protected]] On Behalf Of Thomas Williams Sent: Saturday, June 26, 2021 11:44 PM To: [email protected] Subject: [chirp_users] Help with new radio Hi all, I have an issue with my new UV-5X. (shocking) The firmware version is P51UV01 and CHIRP will not communicate with the radio. My COM port is 3, the radio is a baofeng and the model is UV-5X The CHIRP message is "Rado did not respond" Tried a bunch of baofeng models and got the same response. Downloaded the baofeng software and it reads the radio fine. I can make changes from the keypad of the radio and they show up in the baofeng software when I redownload from the radio. This also works when I use the software to make changes and write the changes to the radio. It appears CHIRP doesn't work with this firmware update. Please correct me if I am wrong, as I am often wrong. This setup is working for me but I prefer CHIRP.
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
