On Mon, Jun 28, 2021 at 9:11 AM Robert Withers (KO4PYS) via chirp_users <[email protected]> wrote: > > In Chirp, how could I set a Rx frequency of 444.525 and a Tx frequency of > 449.525? > > Kindly, > Robert > . .. ... ‘...^,^ >
It depends on the radio being programmed. If the radio supports "split" you can directly enter the TX frequency by setting the Duplex field to "split" and enter the direct TX frequency in the Offset field. Frequency: 444.525000 Duplex: split Offset: 449.525 Then by doing anything the refreshes the spreadsheet style memory editor (clicking on the [Refresh] button for example), CHIRP will update the settings to the following. Frequency: 444.525000 Duplex: + Offset: 5.000000 You obviously could have just entered the second method directly (after calculating the "offset" and determining the "shift direction". See section 6.3 "CHIRP Programming Examples" on the miklor.com website's CHIRP pages. https://www.miklor.com/COM/UV_CHIRP.php#guides JIm KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
