or cut a lttle plastic off.... בתאריך יום ב׳, 25 באוק׳ 2021 ב-4:14 מאת Jim Unroe <[email protected] >:
> On Sun, Oct 24, 2021 at 8:49 PM Rebecca Copeland > <[email protected]> wrote: > > > > Ok, so what do I do now? > > Unless you can get the OEM software to work, it is a cable/connection > problem. No programming software can work unless there is a complete > and working connection between the radio and computer. Make sure that > nothing is getting in the way of the plug getting fully inserted into > the socket. Sometimes the socket cover can get in the way. Sometimes > the shape of the radio's case can get in the way. Sometimes the socket > of these cheap radios is positioned too far inside the case so the > pins of the programming cable can't fully reach inside the socket to > make proper connections. Sometimes it is possible to work around these > issues by pressing on the plug as the cloning progresses. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at [email protected] > To unsubscribe, send an email to > [email protected] > -- Amnon
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
