Hi Gary, The BF-888s uses the "h777.py" driver module. It is available in the CHIRP repository.
https://chirp.danplanet.com/projects/chirp/repository/show/chirp/drivers You may also be interested in looking at Baoclone. It is a basic command line programmer that supports the BF-888s among other Baofeng models. https://github.com/sergev/baoclone Jim KC9HI On Tue, Jan 18, 2022 at 1:58 AM <[email protected]> wrote: > > Newbie here, so haven't found how to search topics yet. > > I have a project where I have an arduino housed in an enclosure with a > baofeng bf-888s. I want to be able to leave the radio on channel one, > and program both pre-stored frequencies, as well as manually entered > frequencies. The arduino is tied to the audio in and out of the > radio. I know enough about arduino coding to generate square wave > output and detect square wave input, vary frequency of the data > pulses, duty cycle, etc. > > What I don't know is what is the protocol for sending a "code plug" to > the BF-888s. Anyone know where to steer me? Mr Google doesn't seem > to understand my question. > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jim at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
