Hm…so I will have to program these channels manually.
> Am 16.03.2022 um 13:25 schrieb Jim Unroe <[email protected]>: > > On Wed, Mar 16, 2022 at 7:05 AM Andreas Führmann via chirp_users > <[email protected]> wrote: >> >> Hi there, >> >> just aquired an RA 685 and programmed it with Chirp. For emergency reasons I >> have also added frequencies outside of the ham band. Now the mistery begins. >> The radio came open with transmit from 136 to 178 MHz and from 400 to 480 >> MHz, which is working without any problem but only in VFO mode. When I go to >> channel mode f.I. on 446 MHz (European PMR), it will not transmit. Maybe >> I‘ve overseen a check box or is there any trick to overcome this issue? >> Thanks in advance. >> >> 73 de DC3AFA, Andy > > Hi Andy, > > It is not a mystery. CHIRP has been programmed to behave the same way > the factory programming software works (TX/RX 144-148 MHz and 430-440 > MHz). Unlike the factory software, CHIRP allows you to also add RX > only frequencies in the 136-174 MHz and 400-480 MHz range. > > Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
