There is no difference between digital and analogue channels EXCEPT the MODE is either FM or DIGITAL so Chirp can write to the "digital" channels. It just can't set MODE to DIGITAL.
> On 25/03/2022 23:04 D.J.J. Ring, Jr. <[email protected]> wrote: > > > That makes it crystal clear. > > Glenn, K0LNY and the rest of us now have a clear answer. CHIRP cannot read or > write to the digital channels! > > Fabulous! > > 73 > > David > N1EA > > > > On Fri, Mar 25, 2022, 10:47 PM Nigel A. Gunn G8IFF/W8IFF <[email protected] > mailto:[email protected] > wrote: > > > At least for the Yaesu FT-70, I don't have other Yaesu digital radios, > > Chirp will program frequencies, repeater shift etc. needed for the analogue > > FM mode but will not let you select digital as a mode or allow the setting > > of callsigns, etc required tor Fusion/Wires-X use. > > > > > On 25/03/2022 22:33 D.J.J. Ring, Jr. <[email protected] mailto:[email protected] > > > > wrote: > > > > > > > > > Nigel, > > > > > > I'm confused - which is probably the way I came out at birth, but > > > isn't the Yaesu Fusion a digital mode? > > > > > > Can CHIRP work with at least the non-digital channels of transceivers > > > like YAESU FT1DR? That's a Fusion radio but I don't see it listed on > > > https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios > > > > > > Other Yaesu Fusion radios are: > > > > > > FT1DR > > > FT2DR > > > FT3DR > > > FT5DR > > > FT-70DR > > > FTM-100DR > > > FTM-300DR > > > FTM-400DR > > > FTM-3200DR > > > FTM-3207DR > > > FTM-7250DR > > > FT-991 > > > > > > I see in supported radios, that these are listed: > > > > > > FTM-3100 (use FTM-3200D selection) > > > FTM-3200D > > > > > > I don't know if FTM-3200D is different than FTM-3200DR > > > > > > Could you help unconfuse me, I don't know much about Yaesu digital radios. > > > > > > Thank you, > > > > > > 73 > > > > > > David N1EA > > > > > > > > > > > > > > > On Fri, Mar 25, 2022 at 6:12 PM Nigel A. Gunn G8IFF/W8IFF > > > <[email protected] mailto:[email protected] > wrote: > > > > > > > > No. Chirp works fine with Yaesu radios. Never heard of a genuine case > > > > of Chirp bricking a radio. > > > > > > > > On 25/03/2022 17:46 K0LNY_Glenn <[email protected]> wrote: > > > > > > > > > > > > Is this correct? > > > > > > > > ----- Original Message ----- > > > > > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
