Hi Jim, Well I put them back into the file you fixed, and there was a problem with zeros in some of the duplex columns, and some missing values in #87 that I copied from the previous line. I uploaded it with no errors this time. All of the channels I put in seem to be there, at least the talking channel dial says they are there. Tomorrow I will see if the Tyt 9800 picks up my 6 meter transmissions, and I'll fill you in then on whether it was a success. Glenn ----- Original Message ----- From: "Jim Unroe" <[email protected]> To: "Discussion of CHIRP" <[email protected]> Sent: Thursday, June 09, 2022 9:29 PM Subject: Re: [chirp_users] Fix a CSV File
On Thu, Jun 9, 2022 at 7:19 PM K0LNY_Glenn <[email protected]> wrote: > > Hi Jim, > Thanks, I had put the 88.5 values into the r-tone field, column G, so I > don't know what happened there. None of the rToneFreq fields had any values. It was the cToneFreq fields that were populated. If both fields must be populated. > On the values for the out of range, fields, if that is going to be a > problem, how will I get 6 meter values in for the KG7D? I don't know. The KG-UV6D driver doesn't support 6 meters frequencies so they wouldn't be imported even if the entries were valid for the KG-UV7D. I suppose you could use the OEM software or program them manually using the radio's keypad. > Thanks. You are welcome. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
