Hi All, Anyone here have any idea on why after installing Chirp on the Raspberrypi that I lost use of keyboard input? The page suggests a command to ensure Chirp has access to the USB cable, and I wonder if that would cause it to not allow any other USB device. When I doover SSH: lsusb the keyboard shows up. The snap command was something like: sudo snap connect chirp-snap:raw-usb
Thanks for any assistence. Glenn ----- Original Message ----- From: "Jim Unroe" <[email protected]> To: "Discussion of CHIRP" <[email protected]> Sent: Tuesday, July 26, 2022 6:58 AM Subject: Re: [chirp_users] RaspberryPI On Mon, Jul 25, 2022 at 11:40 PM K0LNY_Glenn <[email protected]> wrote: > > Hi, > Can Chirp be installed on a RaspberryPI, and if so, is there a script > available for installing the dependencies? > Thanks. > > Glenn Hi Glenn, Yes. I have attached my notes that I used for installing the CHIRP Snap application on my Raspberry Pi model 3B. These notes were derived from the information on this page: https://snapcraft.io/install/chirp-snap/raspbian I just updated my RPi 3 to have the new build released today: CHIRP daily-20220726. Jim KC9HI -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
