Thanks Jim, Actually, after turning off the radio again, and reconnecting, it now connected with both Chirp and the Kenwood software. It must have been the PC setting in menu #9. I changed a few settings with the Kenwood software and wrote that to the radio. Now I'm working with Chirp, and if I can't get my CSV file to work, I'll try yours. Thanks ----- Original Message ----- From: "Jim Unroe" <[email protected]> To: "Discussion of CHIRP" <[email protected]> Sent: Tuesday, August 09, 2022 12:16 PM Subject: Re: [chirp_users] Kenwood Image
On Tue, Aug 9, 2022 at 11:26 AM K0LNY_Glenn <[email protected]> wrote: > > Actually, I used a Chirp CSV that I programmed into it a year or so back. > I just added some channels. > But it won't even do an import, so at that point, it hasn't seen the file. > Glenn How did you add the channels? I would expect that you used a text editor or a spreadsheet program and "broke" the CHIRP compatibility. Can you load the CSV file into CHIRP itself? Do you have a copy of the CSV before you added the additional channels to see if that works?. I have attached a valid CHIRP CSV file with 6 simplex channels. Try it. Jim KC9HI -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
