Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location:
http://trac.chirp.danplanet.com/chirp_daily/daily-20220823 A list of the changes included in this build (since the last daily) follows: Changes for Build #696 [Ran Katz <[email protected]>] [tg_uv2p] (revision 3) Inhibit keypad lock when in dual watch or crossmode. Fixes forth issue in #9939 Added logical tests to raise exception only on user changes to the relevant settings (and not on "static" settings e.g. do to downloaded radio with such a configuration) Also removed the explicit settings on error on both keyunlocked and rx_mode settings [Jim Unroe <[email protected]>] [RB26] Unable to Select Tones Trying to set squelch tones was causing validation errors to pop up thus preventing the user to edit tone values. This was caused by the way CHIRP was programmed to keep various FRS, GMRS and PMR values valid. This patch reworks how the driver validates Frequency, Mode and Power selections. Fixes #9982 [Jim Unroe <[email protected]>] Driver Maintenance: Default to Wide Bandwidth This patch sets the default Mode when programming a memory to FM. Retevis RB17A, RB26, RT21 and RT76 Fixes #9998 [Jim Unroe <[email protected]>] Driver Maintenance: Default to High Power Level This patch sets the default Power level when programming a memory to High. Retevis RB17A, RB26, RT21 and RT76 fixes #9997 [Jim Unroe <[email protected]>] [RT76] Retevis RT76 doesn't support scanning This patch removes the "Skip" column since it is not needed or used. fixes #9996 [Jim Unroe <[email protected]>] [RT29] Power Levels are Incorrectly Applied This patch corrects the faulty operation of the Power setting for the Retevis RT29_UHF and RT29_VHF radios. fixes #9995
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
