------- Original Message -------
On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn <[email protected]> wrote:
> Another approach is to bevel the four edges with a pocket knife, affectively
> making the insertion piece a bit smaller, because
> it may not be the flat surface that is the problem, but the outer diameter of
> the plug
That is what I wound up doing (I used a Dremel and a rattail file) and it
solved the problem nicely.
The Doctor [412/724/301/703/415/510]
WWW: https://drwho.virtadpt.net/
The old world is dying, and the new world struggles to be born. Now is the time
of monsters.
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
