I have a RPi 4 with Raspbian GNU/Linux 11 (bullseye) installed. I was able to
sudo pip install wxPython and it successfully installed wxPython 4.1.1. 4.2.0 failed, but 4.1.1 succeeded. Chirp ran just fine after that. Joe Pizzi KI5LST -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Dan Smith via chirp_users Sent: Sunday, January 15, 2023 12:19 PM To: Discussion of CHIRP <[email protected]> Subject: Re: [chirp_users] Problem on Linux Mint with Mate desktop > I am using Mint 20.02 based on Ubuntu 20.04 and had the same issue with old wxPython. I used this to successfully update wxPython and resolve the issue. > > pip3 install -U -f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-20.04 wxPython This will work for x86_64 machines, but won't work for systems like the Raspberry Pi. But yeah, this gets you on a newer wxPython, which is good for several reasons. I've added this as an optional step to this page: https://chirp.danplanet.com/projects/chirp/wiki/ChirpOnLinux Thanks! --Dan _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
