Hi Jeff, On Wed, Feb 1, 2023 at 9:04 PM Jeff Gallaway <[email protected]> wrote: > > I was using a tidradio bluetooth programming adaptor and after programming > the scan feature stopped working and the programmed channels wouldn't program > and a lot of other issues that I assume come with a bricked radio. I tried > resetting both radios from the menu but it didn't help. I'm assuming the > firmware is messed up somehow. > > UV82HP - > Hold down #3 and power on- US2S35 > Hold down #6 & power on- 150602N > BF-F8HP - > Hold down #3 and power on- F8HP-1 > Hold down #6 & power on6- 160102 > > I'm not sure if there's a way to do a hard reset in chirp to get everything > back to factory settings or if I have to do something with the firmware? Any > help would be appreciated. I'm better at seeing how it's done on video rather > than following steps but anything is worth a try right now. > > Thanks, Jeff
They are not "bricked". Email me directly and I will help you to get them working again. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
