Sorry for the delay, Dan. I have used Chirp-next on the IC-7100 a few times now. I havnt seen any abnormal behaviour so afaic its a tick in the working box for the Icom IC-7100. I had a silly idea the other day, while the IC-7100 cannot be programmed in the normal way, the SD card can. How about something to write the data to the SD card for loading into the 7100 ?. I did say a 'silly idea' 73 Mike
On 08/02/2023 15:00, Dan Smith via chirp_users wrote: >> I understand the LIVE reminder when reading the IC-7100 memory banks >> into Chirp, but how do I load a data file to program the damn thing?. >> Either I'm thick or I'm missing something, or both ! > Open the data file and the radio at the same time. Then copy and paste the > memories you want between the tabs. You can open any sort of data file (even > an image of another radio) to use, but I assume you have a CSV file to load > from? > > By the way, we're still looking for confirmation that the 7100 works on > -next, which it sounds like it does, so if you wouldn't mind creating a > chirp-next report "bug" on the website to document that you're using it > successfully, I can get it marked off the list. > > Thanks! > > --Dan > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Mike at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
