There is a reset procedure on youtube. Press "A' xmit, monitor andsomething
else and power on. This is for newer radios to go out of band. Did help my
problem.
-------- Original message --------From: Jim Unroe <[email protected]> Date:
5/31/23 10:20 AM (GMT-06:00) To: Discussion of CHIRP
<[email protected]> Subject: Re: [chirp_users] Uv82hp On Wed,
May 31, 2023 at 11:01 AM K0LNY <[email protected]> wrote:>> I wonder if there
is a key sequence for a full reset.> Like hold down some specific buttons while
powering it on.> GlennThe UV-82HP has something like three different memory
layouts. Theyare not compatible. So uploading a CHIRP Radio Images (*.img)
filefrom a different radio using an older version of CHIRP that didn'tprotect
for this could cause unwanted side effects. Some have beenknown to be; 1 the
radio won't scan, 2 the radio won't receive unlessthe [MONI] button is pressed,
3 the radio won't TX.If this is the case, which I am waiting for a reply to
find out, thenthere is a special method that can perform a full upload of
a"compatible" image to correct the problem that was created bypreviously
uploading an "incompatible" image.CHIRP now tries to protect from this but
there is nothing preventingBaofeng from changing the memory layout in another
place in thefuture. This is why I no longer recommend swapping images
betweenBaofeng radios (even if the model and firmware versions are the
same).The only safe way is to download from both radios to open a tab foreach
radios. Copy-and-paste the channels between tabs as needed andfinally upload
each tab back to the radio that created it.Jim
KC9HI_______________________________________________chirp_users mailing
[email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis
message was sent to Charles Land at [email protected] unsubscribe, send
an email to [email protected] report this email
as off-topic, please email [email protected]
archive: https://www.mail-archive.com/[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
