Thanks guys, good feedback,
Ken I use the RT systems controller and cable. Mine uses a usb port and it works well. Sometimes you have to hold the cable where it hooks into the computer to keep a tight connection. I use Chirp on Baofeng radios and it also works well if you get the legitimate cable. The Baofeng/Kenwood cable are different than the Yaesu cable.
> Absent any first-hand experience, I think I'll try manual programming for local repeaters, and if that gets too tedious, I'll just order the BlueMax49ers cable.
I don't have first-hand experience, but I can offer second-hand experience recently. When converting the ft90 driver for chirp-next, I was working with a guy and we did get it working, so I think it's fine. It's not a popular (or common) radio and the driver doesn't support more than basic memory editing, but did seem to work.
That said, I would encourage you to not cheap out on a cable (which you seem to realize is smart) on this one, even more so than normal. The ft90 is a weird arrangement where it requires power from the computer on one of the signal lines to work properly. Most radios only use a two or three-wire connection for the data lines, but this requires one of the hardware signaling lines. So, BlueMax49ers is the way to go, IMHO.
--Dan
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mike Geiman at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email [email protected]
Searchable archive: https://www.mail-archive.com/[email protected]
|
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
