On Sun, Jul 16, 2023 at 1:10 PM John Oliver <[email protected]> wrote: > > They are :-) The Y cable that came with the radio has RJ45 for the mic, and > two different size jacks. It looks exactly like the two different size jacks > on the cable for my other Baofeng, and that cable snaps in. I literally > cannot plug the data jack into the smaller jack... it is too big.
The Y cable that came with the radio is for being able to plug a typical Kenwood 2-pin style speaker/mic or an APRS cable into the radio to be used instead of the mic that comes with the radio. It is not for programming the radio. Again. The DATA port is on the back of the radio next to the fan. It is labeled "DATA" above the port. Only this port can be used for programming. > And the CIRP I'm running is "CHIRP next-20230712 on Python 3.8.10 wxPython > 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4" Then you should see the "debug" selections in the drop down "Help" menu. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
