On Mon, Jan 15, 2024 at 4:55 PM Roland Welte <roland.we...@bluewin.ch> wrote: > > Dear Chirp Community, > > > > I am using Chirp Next with a BAOFENG 5RX radio. Since this particular radio > is not among the supported devices I select radio BAOFENG UV-5R, which > generally works fine. However, the 5RX radio covers airband frequencies > (108-136 MHz) which the UV-5R does not, so Chirp won’t let me enter airband > frequencies (although downloading these frequencies from the radio works > fine). Is there a trick to circumvent Chirp’s validity checks when entering > frequencies? > > > > Your help with this is very much appreciated, > > Roland
The UV-5R support is limited to the bands that the radio supports. But there is currently development going on for this model and a test driver module available for testing and feedback. Searching the CHIRP Activity page with '5rx' will currently bring up the active issue (#11046) at the top of the list. I have provided a direct link to the ticket below. https://chirp.danplanet.com/issues/11046 The current vendor/device selections are currently Baofeng / UV-5RX but I have plans to change that to '5RX' with the next test build or submission. Please test the driver module and provide feedback. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com