Good afternoon all, from a new Chirp user. Is there a difference between the Icom IC-746 and IC-746Pro in the way it communicates from the Remote port?
I downloaded and installed Chirp and tried to connect to my IC-746Pro using the Chirp IC-746 configuration, and could not connect. Tried the same thing with my IC-7300 (using the Chirp IC-7300 configuration) and it connected and programmed the memories just fine, so the cable and the computer's USB port are working as they should. I did verify that CI-V is turned on in the radio and the address is set to 0x66. (Speaking of which, how do I set the address in Chirp? Maybe that's the problem...) Thanks... Rick WA1RKT Londonderry, NH Catch me on 14.300 MHz Intercon / MMSN most days _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
