Wednesday, February 28, 2024, 5:14:12 PM, you wrote: > On Wed, Feb 28, 2024 at 9:27 AM Massimo Nespolo > <[email protected]> wrote: >> >> Greetings from France. >> >> When I first got my UV-5R, the channel programming with CHIRP was >> performed by a friend, who locked the menu button to prevent a beginner >> like me to make any mistake which could have screwed the programming. >> >> Now I would like to unlock the menu, but I cannot figure out how to do >> it. I did quite a lot of internet research, but I could only find >> duplicate tutorials on how to lock the pad with the key button. That >> is not what I am looking for, of course. The menu button is >> unresponsive, I would like to unlock it. >> >> Thank you in advance for your help.
> Just for clarification, unless you have one of the radios that can > disable the user from accessing VFO (frequency) mode, such as the F11, > UV-82C or UV-82HP, and the the menus were disabled with the radio in > MR (channel) node, then there is no way to prevent the radio's user > from accessing any of the menus. They are only disabled while the > radio is in MR mode. All that needs to be done to access any menu is > to switch to VFO mode (where all menus are always accessible no matter > if they have been "disabled", or not). > To enable the settings that disable the "RESET Menu" setting and the > "All Menus" setting using CHIRP you tick the following settings. Settings ->> Advanced Settings -> RESET Menu Settings ->> Advanced Settings -> All Menus > Jim KC9HI That's what I needed! Thank you so much! Massimo _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
