Hi Joel/Erik/All, I don't think armv5 is an issue. Reason being I used the jaunty armv5 libraries to build chrome.
I tried to debug the issue with gdb. gdb chrome GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html > This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "arm-linux-gnueabi"... (gdb) (gdb) run Starting program: /home/adas/Release/chrome [Thread debugging using libthread_db enabled] [New Thread 0x4112ac80 (LWP 9722)] [New Thread 0x41d49440 (LWP 9727)] [New Thread 0x42549440 (LWP 9728)] [New Thread 0x42d49440 (LWP 9729)] [New Thread 0x43549440 (LWP 9730)] [New Thread 0x43d49440 (LWP 9731)] [New Thread 0x44549440 (LWP 9732)] [New Thread 0x44d49440 (LWP 9733)] [New Thread 0x44d69440 (LWP 9734)] [New Thread 0x458ff440 (LWP 9738)] [New Thread 0x460ff440 (LWP 9739)] [Thread 0x460ff440 (LWP 9739) exited] Program received signal SIGILL, Illegal instruction. [Switching to Thread 0x4112ac80 (LWP 9722)] 0x0081caec in S32A_Opaque_BlitRow32_neon () Current language: auto; currently asm The error S32A_Opaque_BlitRow32_neon () had to do something with the floating point setting of the kernel. I checked my kernel configuration and neon was not set. So I set it and it rebuild my kernel and booted my jaunty. Now it works perfectly...without any crashes. Key : In order to run chromium we need to set the neon in the kernel configuration. Regards, Sofia On Fri, Dec 11, 2009 at 2:27 AM, Erik Corry <erik.co...@gmail.com> wrote: > 2009/12/10 Sofia Tahseen <sofia.tahs...@gmail.com>: > > You are so right, Joel... I corrected my .so and now I could build the > > chrome browser ...finally!! I copied the whole /src/out/Release > directory > > to my jaunty on the BeagleBoard(256MB RAM). I try to launch chrome > through: > > ./chrome > > It starts up chrome, and then immediately kills chrome. I get an Illegal > > Instruction. I restart and I can now see chrome as shown in the > attachment > > but I cannot browse. When I reload the page, it again kills chrome saying > > Illegal instruction. Has anyone seen this before? I have my proxy > settings > > set too.. > > This could be anything, but it might be this bug in some versions of > gcc: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=39604 > > If that's it then adding -fno-tree-sink to the flags used for V8 will > help. It's a bug that only shows up on ARM and only on some versions > of gcc. > > > > > Any help is highly appreciated. > > Thanks, > > Sofia > > > > On Wed, Dec 9, 2009 at 6:00 PM, Joel Stanley <j...@chromium.org> wrote: > >> > >> On Thu, Dec 10, 2009 at 05:14, Sofia Tahseen <sofia.tahs...@gmail.com> > >> wrote: > >> > >> > > >> > > /home/adas/0_Data/0_Lin/091203_Chromium_OS/toolchain/arm-2009q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/../../../../arm-none-linux-gnueabi/bin/ld: > >> > skipping incompatible > >> > > >> > > /home/adas/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sys-root/usr/lib/librt.so > >> > when searching for -lrt > >> > >> The errors are indicative of trying to link against libraries from a > >> different platform. To confirm: check the output of > >> > >> $ 'file > >> > /home/adas/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sys-root/usr/lib/librt.so > >> > >> I suspect it will tell you it's a symbolic link to /lib/librt.so.1, > >> which itself is a symbolic link to > >> /lib/librt-2.10.2.so - note these paths are relative to /, not to your > >> sysroot directory. > >> > >> You have two slightly solutions > >> - adjust the symlinks in sys-root/usr/lib so they point to the files > >> in sys-root//lib > >> - replace the smymlinks with the actual libraries, ie copy files from > >> sys-root/lib to sys-root/usr/lib > >> > >> I would be happy to hear a neater solution for this, but the above > >> worked for me. > >> > >> Cheers, > >> > >> Joel > > > > -- > > Chromium Developers mailing list: chromium-dev@googlegroups.com > > View archives, change email options, or unsubscribe: > > http://groups.google.com/group/chromium-dev > -- Chromium Developers mailing list: chromium-dev@googlegroups.com View archives, change email options, or unsubscribe: http://groups.google.com/group/chromium-dev
