This is an automated email from git. It was enerated because a ref change was pushed to the repository "chrony/chrony.git".
The branch, master has been updated via cea68ebc6fa4a7add9cb3bbd428cff80875eba32 (commit) via a33a955163c1af459af176b3fdc1c4c56b4f25f3 (commit) via a3e60c93da7e216ff76f72f73ed33775be369ede (commit) via 44c9744d69b2e116d7881ad5413f27fe1812ed89 (commit) via b69b648d1879a1e32c40fbb8ccacd890fadc3813 (commit) via 3ebebac695087f19b90e2d528534550655de9b48 (commit) via 13d734c8d26054ddf329d8dba64365d29709df3c (commit) via c903c5f72bb3001af30cd15458afafbb0089b962 (commit) via b03c7581f2968449cc2a7057c11d3531e3c61652 (commit) via 2ed9853bcc6a2e75749dd8a8153cdfb9efd8b236 (commit) from 26e00ffbeb608f43106fec96c94629dbe74e87fd (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit cea68ebc6fa4a7add9cb3bbd428cff80875eba32 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Mon Jun 2 18:22:48 2014 +0200 test: extend 005-externalstep commit a33a955163c1af459af176b3fdc1c4c56b4f25f3 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Mon Jun 2 17:14:28 2014 +0200 local: reset daemon after unexpected time jump Add a new change type and use it when an unexpected time jump is detected in the scheduler to reset reference times, offset and slewing, NCR instances (with their polling interval), synchronization status, and drop all sourcestats, manual, refclock and RTC samples. This should make the recovery more graceful if the estimated jump has a large error (e.g. select didn't timeout, or after system suspend). commit a3e60c93da7e216ff76f72f73ed33775be369ede Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Fri May 30 17:30:02 2014 +0200 sched: try to detect also forward time jumps commit 44c9744d69b2e116d7881ad5413f27fe1812ed89 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Fri May 30 13:02:45 2014 +0200 local: replace is_step_change parameter of change handler with enum Prepare for a new change type that will be added later. commit b69b648d1879a1e32c40fbb8ccacd890fadc3813 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Fri May 30 14:46:46 2014 +0200 local: refactor invocation of parameter change handlers commit 3ebebac695087f19b90e2d528534550655de9b48 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Fri May 30 17:04:10 2014 +0200 ntp: reset NCR instance thoroughly when switching to offline commit 13d734c8d26054ddf329d8dba64365d29709df3c Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Mon Jun 2 16:30:12 2014 +0200 sourcestats: reset SST instance thoroughly when dropping samples commit c903c5f72bb3001af30cd15458afafbb0089b962 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Thu May 29 18:43:11 2014 +0200 sourcestats: remove forgotten declaration commit b03c7581f2968449cc2a7057c11d3531e3c61652 Author: Miroslav Lichvar <mlich...@redhat.com> List-Post: chrony-dev@chrony.tuxfamily.org Date: Fri May 30 16:12:02 2014 +0200 configure: fix test code to be compilable with -Werror commit 2ed9853bcc6a2e75749dd8a8153cdfb9efd8b236 Author: Hattink, Tjalling [FINT] <t.hatt...@fugro.nl> List-Post: chrony-dev@chrony.tuxfamily.org Date: Wed May 28 13:54:27 2014 +0200 rtc: more reliable method of reading rtc for initial trim When chrony reads in the linux rtc for the first time to trim the system clock, it only reads it once. As it is possible that the rtc updates itself during the read operation, the reported rtc time could be false. To prevent this I've added a loop that reads the rtc clock twice, if the seconds do not match retry the two read operations. If they match you can assume the read operation was successful. This is based on the hwclock implementation of reading the rtc clock from the util-linux package. ----------------------------------------------------------------------- Summary of changes: configure | 4 +- local.c | 43 +++++++++++-------------- local.h | 12 +++++-- manual.c | 9 ++++- ntp_core.c | 66 ++++++++++++++++++++------------------ ntp_core.h | 3 ++ ntp_sources.c | 10 ++++-- refclock.c | 12 ++++-- reference.c | 7 +++- rtc_linux.c | 20 ++++++++++-- sched.c | 54 ++++++++++++++++-------------- sources.c | 16 +++++++-- sourcestats.c | 34 +++++++++++++------ sourcestats.h | 8 ++--- sys_generic.c | 11 +++++- test/simulation/005-externalstep | 29 +++++++++++++++- 16 files changed, 215 insertions(+), 123 deletions(-) hooks/post-receive -- chrony/chrony.git -- To unsubscribe email chrony-dev-requ...@chrony.tuxfamily.org with "unsubscribe" in the subject. For help email chrony-dev-requ...@chrony.tuxfamily.org with "help" in the subject. Trouble? Email listmas...@chrony.tuxfamily.org.