Hi folks, I just started working with Chrony since ntpd is just not meeting my needs. I've done a bit of experimentation and have Chrony working however it's not quite doing what I need and I'd like to ask if my requirements are achievable.
I'm working with systems of networked computers that are deployed into remote sites with potentially spotty internet access as well as clocks that have been manually maintained by field staff for decades. I'm looking into bringing all these remote sites in synch with our main data centre. Currently there is a master server at each site that maintains time with the other nodes via NTP. The server is currently serving up its local system clock via ntpd and the local system clock is set manually by field staff. I would like to correct the clock on these master servers via NTP, while continuing to have to the other client nodes synchronize to the master server's local clock. I have Chrony on the master server configured with some remote servers as well as the "local" config option. The clients are using a mix of Chrony and other NTP clients and are all configured to reference just the master server. In my test setup I have the master server's clock set back about 3 hours and Chrony appears to be working great and is moving time towards what is reported by the external NTP servers: Reference ID : <external NTP server IP> Stratum : 3 Ref time (UTC) : Mon Dec 2 23:54:06 2013 System time : 10695.995117188 seconds slow of NTP time Last offset : -0.000003188 seconds RMS offset : 0.000003775 seconds Frequency : 25.137 ppm fast Residual freq : 0.001 ppm Skew : 0.091 ppm Root delay : 0.090602 seconds Root dispersion : 0.089578 seconds Update interval : 7.6 seconds Leap status : Normal However, I need the clients of the master server to remain synchronizing against the master server's local clock and not the NTP time reported by the external servers. Looking at the chronyd instance running on one of my clients, it appears that the master server's chronyd is acting more like a proxy for the external servers: Reference ID : <master server IP> Stratum : 4 Ref time (UTC) : Mon Dec 2 23:54:13 2013 System time : 0.000000159 seconds slow of NTP time Last offset : -0.000000014 seconds RMS offset : 0.000001335 seconds Frequency : 44.483 ppm slow Residual freq : -0.001 ppm Skew : 0.116 ppm Root delay : 0.092535 seconds Root dispersion : 0.089574 seconds Update interval : 2.0 seconds Leap status : Normal This client was previously synchronized with the external NTP servers which is why it is reporting that it is in synch with NTP time. Since the master server is about 3 hours behind NTP time I need this client to say it is about 3 hours ahead of the master server. While this example is a bit contrived, I think it illustrates that the chronyd running on the master server is telling the clients the external NTP time when I really want it to tell the clients the local system time. Is it possible to configure chronyd to always serve it's local clock, regardless of the state of the external/remote servers? Thanks, Chris -- To unsubscribe email chrony-users-requ...@chrony.tuxfamily.org with "unsubscribe" in the subject. For help email chrony-users-requ...@chrony.tuxfamily.org with "help" in the subject. Trouble? Email listmas...@chrony.tuxfamily.org.
