William G. Unruh | Canadian Institute for| Tel: +1(604)822-3273
Physics&Astronomy | Advanced Research | Fax: +1(604)822-5324
UBC, Vancouver,BC | Program in Cosmology | [email protected]
Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/
On Tue, 22 Apr 2014, slippyr4 wrote:
Hi All,
I'm using chrony on a raspberry pi based datalogger, which has no internet
access, period. I have an I2C RTC
attached to the pi to maintain time when it's powered down.
I am using gpsd and linuxpps for my time source. To that end, i have this in
chrony.conf:-
refclock PPS /dev/pps0 lock SHM0 poll 1 prefer
refclock SHM 0 offset 0.125 delay 0.2 refid SHM0 poll 2 noselect
It works well. However. a few days ago I managed to drop the box with my pi in
and the battery fell out of the RTC.
Next boot, it's 1970,
I'd like to find a way for chrony to correct that time rapidly.
Well, you could do it with chronyc and ask it to set the rtc. Of course I do
not know if chrony can actually access and control the add on rtc you have.
hwclock should be able to do it. You can also tell chrony to jump the system
clock if the time is out by more than say 100 sec.
That way the system clock would be on time, and then you could use hwclock to
set the rtc.
This sounds like a one-off event, so any of those should work. initstepslew in
te config file is for problems each time the system is brought up (eg for a
RPi without an rtc).
It looks like initstepslew is almost what I want, but not quite - because it
wants to operate with ntp servers on
the network, which are not available?
Can chrony do this, or am I going to need to write some sort of script to set
the hardware clock manually if it's
wildy out? It'd be a shame if chrony couldn't do this for me.
thanks
Jon
--
To unsubscribe email [email protected]
with "unsubscribe" in the subject.
For help email [email protected]
with "help" in the subject.
Trouble? Email [email protected].
