On Sunday, May 15, 2022, Andrea paz <gamberucci.and...@gmail.com> wrote:
> > just add this line (-DWITH_JASPER=OFF) without '+' to your opencv_build > file in cinegg src root...? > > I tried adding the line with jasper in opencv_build and then compiling > CinGG. The result is the same: the OpenCV plugins are not present. ( thanks for trying.... > > Ho decommentato la riga con truehd in bdcreate.C e provato a fare un > rendring con "BD Render...". > Render::render_single: Session finished. > ** rendered 677 frames in 16.477 secs, 41.088 fps > ++ dirname /tmp/bd_20220515-185631/bd.sh > + sdir=/tmp/bd_20220515-185631 > ++ cd /tmp/bd_20220515-185631 > ++ pwd > + dir=/tmp/bd_20220515-185631 > + PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/ > jvm/default/bin:/opt/rocm-5.1.2/bin:/opt/rocm-5.1.2/hip/bin: > /usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_ > perl:/home/paz/cinelerra5/cinelerra-5.1/bin > + mkdir -p /tmp/bd_20220515-185631/udfs > ++ du -cb /tmp/bd_20220515-185631/bd.m2ts > ++ tail -1 > ++ sed -e 's/[ ].*//' > + sz=44414976 > + blks=25783 > + rm -f /tmp/bd_20220515-185631/bd.udfs > + '[' -f /tmp/bd_20220515-185631/bd.meta ']' > + mkudffs -b 2048 /tmp/bd_20220515-185631/bd.udfs 25783 > filename=/tmp/bd_20220515-185631/bd.udfs > label=LinuxUDF > uuid=628130f3e97336f3 > blocksize=2048 > blocks=25783 > udfrev=2.01 > start=0, blocks=16, type=ERASE > start=16, blocks=4, type=VRS > start=20, blocks=76, type=ERASE > start=96, blocks=16, type=MVDS > start=112, blocks=16, type=ERASE > start=128, blocks=4, type=LVID > start=132, blocks=124, type=ERASE > start=256, blocks=1, type=ANCHOR > start=257, blocks=25264, type=PSPACE > start=25521, blocks=5, type=ERASE > start=25526, blocks=1, type=ANCHOR > start=25527, blocks=73, type=ERASE > start=25600, blocks=16, type=RVDS > start=25616, blocks=166, type=ERASE > start=25782, blocks=1, type=ANCHOR > + mount -t udf -o loop /tmp/bd_20220515-185631/bd.udfs > /tmp/bd_20220515-185631/udfs > + bdwrite /tmp/bd_20220515-185631/udfs /tmp/bd_20220515-185631/bd.m2ts > unknown bluray audio format 0 ch I have workaround for this, just not sure if it makes any sense without proper ac3/thd interleaving ... currently I think you can try to render just video in ts and ac3 + thd audio separately, then use thdmerge on audio and tsmuxer on video ts + result of thdmerge... > > CinGG crashes at the end of rendering; but the bd.m2ts file is > produced anyway. This is not read by VLC but works in mpv. As you > anticipated only 2 audio tracks were produced: The 2 source files were > m2ts (plus a h264 .mov video) with 22 audio channels each. > > $ ffprobe bd.m2ts > ffprobe version n5.0 Copyright (c) 2007-2022 the FFmpeg developers > built with gcc 11.2.0 (GCC) > configuration: --prefix=/usr --disable-debug --disable-static > --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm > --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls > --enable-gpl --enable-ladspa --enable-libaom --enable-libass > --enable-libbluray --enable-libdav1d --enable-libdrm > --enable-libfreetype --enable-libfribidi --enable-libgsm > --enable-libiec61883 --enable-libjack --enable-libmfx > --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb > --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus > --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr > --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 > --enable-libtheora --enable-libv4l2 --enable-libvidstab > --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp > --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2 > --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc > --enable-shared --enable-version3 > libavutil 57. 17.100 / 57. 17.100 > libavcodec 59. 18.100 / 59. 18.100 > libavformat 59. 16.100 / 59. 16.100 > libavdevice 59. 4.100 / 59. 4.100 > libavfilter 8. 24.100 / 8. 24.100 > libswscale 6. 4.100 / 6. 4.100 > libswresample 4. 3.100 / 4. 3.100 > libpostproc 56. 3.100 / 56. 3.100 > [mpegts @ 0x55cd19a640c0] start time for stream 2 is not set in > estimate_timings_from_pts > [mpegts @ 0x55cd19a640c0] stream 2 : no TS found at start of file, > duration not set > [mpegts @ 0x55cd19a640c0] Could not find codec parameters for stream 2 > (Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels, fltp): unspecified > sample rate > Consider increasing the value for the 'analyzeduration' (0) and > 'probesize' (5000000) options > Input #0, mpegts, from 'bd.m2ts': > Duration: 00:00:28.24, start: 0.083422, bitrate: 12584 kb/s > Program 1 > Stream #0:0[0x1011]: Video: h264 (High) ([27][0][0][0] / 0x001B), > yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98 > fps, 23.98 tbr, 90k tbn > Stream #0:1[0x1100](ita): Audio: truehd ([131][0][0][0] / 0x0083), > 48000 Hz, stereo, s32 (24 bit) > Stream #0:2[0x1100]: Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels, > fltp > > > I also add cin5.log and config.log in case you ever need it. >
-- Cin mailing list Cin@lists.cinelerra-gg.org https://lists.cinelerra-gg.org/mailman/listinfo/cin