http://bugs.cinelerra.org/show_bug.cgi?id=229
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Severity|major |normal
Priority|High |Low
------- Additional Comments From [EMAIL PROTECTED] 2006-01-22 05:17 -------
I am now successfully rendering MPEG video by the simple measure of using the
Format Preset of DVD. I thought I had tried this before but perhaps I had other
problems at that time (I was using the heroine rpms of Cinelerra, I hadn't fully
worked out interlacing and format settings etcetera)).
I noticed:
INFO: [mpeg2enc.plugin] Horizontal size: 720 pel
INFO: [mpeg2enc.plugin] Vertical size: 576 pel
INFO: [mpeg2enc.plugin] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc.plugin] Frame rate code: 3 = 25.0 (PAL/SECAM VIDEO /
converted FILM)
INFO: [mpeg2enc.plugin] Bitrate: 7500 KBit/s
The aspect ratio code is coming up as 4:3 (rather than 1:1 as it has been when
rendering to Format Preset of Generic MPEG-2.)
I also noticed that the aspect ratio Cinelerra Settings>Format>Aspect ratio>Auto
had been generating for my resolution is wrong (5:4 rather than 4:3). I will
file a seperate bug about this one.
After manually setting the aspect ration correctly I could still get no success
with rendering to MPEG video>Format Preset>Generic MPEG-2>MPEG2, or with the
YUV4MPEG pipe method discussed above. I tried it with the original DV file and
with a blank project. I did seem to narrow down some very consistent behaviour
with the former method: all attempts ended with the same error re: must specify
bit-rate (see output below). There were no settings or click of buttons on the
quantisation sttings/ bitrate which would change this error.
So - in short - I will leave this bug open unless someone advises otherwise. It
seems it probably is the "known bug" re parameter passing to Mpeg2enc. I can't
see this bug reported anywhere on this system so I will leave it for now. Okay?
Also the YUV4MPEG pipe method discussed above still crashes cinelerra. It works
okay on blank footage but I'm not sure what this proves. I am happy to help any
further research this but as I now have the functional behaviour I need from
Cinelerra I will not push it myself.
**************************************
FileMPEG::open_file: Unsupported aspect ratio 1.250000
FileMPEG::open_file: Running /usr/local/lib/cinelerra/mpeg2enc.plugin -b 1000000
-q 0 -a 2 -F 3 -I 1 -M 1 -z t -f 3 -g 45 -G 45 -R 0 -o
'/home/gray/video/temp/bugtestvid9'
INFO: [mpeg2enc.plugin.bin] SETTING EXTENDED MMX for MOTION!
INFO: [mpeg2enc.plugin.bin] SETTING SSE and MMX for TRANSFORM!
INFO: [mpeg2enc.plugin.bin] SETTING EXTENDED MMX for PREDICTION!
INFO: [mpeg2enc.plugin.bin] Selecting generic MPEG2 output profile
INFO: [mpeg2enc.plugin.bin] Assuming norm PAL
INFO: [mpeg2enc.plugin.bin] Encoding MPEG-2 video to
/home/gray/video/temp/bugtestvid9
INFO: [mpeg2enc.plugin.bin] Horizontal size: 720 pel
INFO: [mpeg2enc.plugin.bin] Vertical size: 576 pel
INFO: [mpeg2enc.plugin.bin] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc.plugin.bin] Frame rate code: 3 = 25.0 (PAL/SECAM VIDEO /
converted FILM)
INFO: [mpeg2enc.plugin.bin] Bitrate: VCD
INFO: [mpeg2enc.plugin.bin] Quality factor: 1 (Quantisation = 1) (1=best,
31=worst)
INFO: [mpeg2enc.plugin.bin] Field order for input: top-field-first
INFO: [mpeg2enc.plugin.bin] Sequence unlimited length
INFO: [mpeg2enc.plugin.bin] Search radius: 16
INFO: [mpeg2enc.plugin.bin] DualPrime: no
INFO: [mpeg2enc.plugin.bin] Using one-pass rate controller
INFO: [mpeg2enc.plugin.bin] GOP SIZE RANGE 45 TO 45 (all GOPs closed)
**ERROR: [mpeg2enc.plugin.bin] Generic format - must specify bit-rate!
signal_entry_recoverable: got SIGPIPE my pid=4805
signal_entry_recoverable: got SIGPIPE my pid=4805
signal_entry_recoverable: got SIGPIPE my pid=4805
signal_entry_recoverable: got SIGPIPE my pid=4805
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
