hi scott,
surprisingly worked - only had to recompile libmpeg.
cheers
jan
Scott C. Frase wrote:
Jan,
Yes, Marcin's fix
(https://init.linpro.no/pipermail/skolelinux.no/cinelerra/2006-November/008696.html)
was to edit the line after:
// Read up to current frame
and then recompile Cinelerra.
scott
On Sun, 2006-11-19 at 20:46 +0100, Jan Luo wrote:
hi scott,
to make things more complicated it looks like we're refering to
differt versions of libmpeg.
just upgraded to libmpeg3-1.7 ( hard masked - will say unstable ).
now i do not have playback problems with the "surfing" clip, but still
in some other ones.
my unqualified guess is that it all depends on the camcorder - there
codecs - anyhow.
trying to edit 3-1.7 i find the following code:
// Read up to current frame
mpeg3video_drop_frames(video, frame_number - video->framenum, 1);
break;
}
}
}
else
{
video->repeat_count = 0;
mpeg3video_drop_frames(video,
frame_number - video->framenum, 0);
should i try to change the "1" to "0" in the 2nd line?
cheers
jan
Scott C. Frase wrote:
hi jan,
I'm running Fedora Core 4 and use "yum" to install my dependencies.
Unfortunately, I don't know about Gentoo. The libmpeg3 I am using is
specific to Heroine Warrior (consequently, the Cinelerra CVS) and comes
with the source code from the subversion repository when you download
it. This version is libmpeg3hv-1.5.0:
ldd /usr/local/bin/cinelerra | grep mpeg3
libmpeg3hv-1.5.0.so.1 => /usr/local/lib/libmpeg3hv-1.5.0.so.1
(0xb7bb6000)
Unless someone else has been successful with using later versions of
libmpeg3 when building Cinelerra from source, I'm pretty sure you'll
need to use this older version that comes with the repository in order
for the source code to build properly.
scott
On Sun, 2006-11-19 at 18:58 +0100, Jan Luo wrote:
hi scott,
in gentoo libmpeg3 is a separate ebuild. which version are you running?
mine is media-libs/libmpeg3-1.5.2-r3. maybe an update to 1.7 would also
work?
otherwise i have to to understand how to edit ( = apply the fix ) to the
source code - never done that before.
thanks
jan
Scott C. Frase wrote:
Jan,
You'd need to checkout the Cinelerra source code from subversion:
http://cvs.cinelerra.org/svnusage.php#anon
make the edit as specified in Marcin's email:
https://init.linpro.no/pipermail/skolelinux.no/cinelerra/2006-November/008696.html
to edit line 357 in libmpeg3/video/seek.c in the Cinelerra source
directory. Then recompile.
of course, to compile from source, you need all the programs Cinelerra
is dependent upon. For my Fedora system, I've listed them here:
http://crazedmuleproductions.blogspot.com/2006/08/fc4-dependencies-for-cinelerra-cvs.html
scott
On Sat, 2006-11-18 at 21:07 +0100, Jan Luo wrote:
hi,
same thing here. how and where could i apply the fix - in gentoo?
am not a coder but know how to use an editor;-).
cheers
jan
Scott C. Frase wrote:
Hey guys,
Here are my results. One note: I encountered the 1080i playback bug
that Marcin Kostur reported a few weeks back, wherein 1080i output plays
back normally (~30fps) from the start of the video, but slows down
considerably to 2fps if you choose a random point within the video.
This bug documented here:
http://bugs.cinelerra.org/show_bug.cgi?id=348
However, this bug has not been resolved, other than in the fix that
Marcin found:
https://init.linpro.no/pipermail/skolelinux.no/cinelerra/2006-November/008696.html
Could any of the programmers update Bug 348 to let us know if this fix
is sufficient?
thanks,
scott
PS - here are my results of the playback:
System:
Cinelerra CVS, SVN r947
Dell 400SC, 3.2Ghz, 800FSB, 2GB 400Mhz, Dual DDR, ECC
250GB SATA system drive
Nvidia GEForce 7600GS 8xAGP video card, 512MB memory
Project Format: 1080i preset
Driver: X11-OpenGL or X11-XV
Playback every frame/Decode frames async: unselected
Compositor: 75% spanned across two monitors
Playback FPS (from beginning of video): OpenGL: 30.15, XV: 29.4
Playback FPS (from 3 seconds into the video): OpenGL 2.21, XV: says
29.94, but that is not correct, as playback is slowed considerably
When I playback the video, I get a bunch of these messages in the
terminal window in which I started cinelerra:
mpeg3_read_prev_packet 100 result=0 title=0 tell=5866ff8
program_byte=5866ff8
mpeg3_read_prev_packet 1 result=0 title=0 tell=5866ff8
program_byte=5866ff8
/sbin/hdparm -t -T /dev/sda
/dev/sda:
Timing cached reads: 2528 MB in 2.00 seconds = 1263.76 MB/sec
Timing buffered disk reads: 116 MB in 3.01 seconds = 38.58 MB/sec
iostat output (average):
avg-cpu: %user %nice %sys %iowait %idle
73.83 0.00 3.10 0.00 23.08
cat /proc/meminfo:
MemTotal: 2070884 kB
MemFree: 812096 kB
Buffers: 62404 kB
Cached: 407492 kB
SwapCached: 0 kB
Active: 973628 kB
Inactive: 199840 kB
HighTotal: 1179088 kB
HighFree: 66404 kB
LowTotal: 891796 kB
LowFree: 745692 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 8 kB
Writeback: 0 kB
AnonPages: 703688 kB
Mapped: 79100 kB
Slab: 58140 kB
PageTables: 7232 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 1035440 kB
Committed_AS: 2329572 kB
VmallocTotal: 116728 kB
VmallocUsed: 43068 kB
VmallocChunk: 67060 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
I got 29.94 fps. Compositor at 75 between 24->28 fps when compositor was at a scale of 50 % on a Intel(R)
Pentium(R) D CPU 2.66GHz
When at 100% I get 19 fps with the picture going over both screens (dual
monitor) and 24-25 fps when compositor on 1 screen, (but whole picture
not visible)
Video Driver: X11-XV
Play every frame is selected
Decode frames asyncronously unselected (REALLY slow when selected!)
Video Card: nVidia Corporation GeForce 6200
Dual monitor, both @ 1280x1024
nvidia module version = 1.0.9629
/sbin/hdparm -t -T /dev/hda
/dev/hda:
Timing cached reads: 1884 MB in 2.00 seconds = 941.43 MB/sec
Timing buffered disk reads: 214 MB in 3.02 seconds = 70.90 MB/sec
Using Fedora Core 6, and livna repository to satisfy required libraries.
Compiling cinelerra with the following script:
#!/usr/bin/bash
echo configureing for pentium4
# --with-external-ffmpeg
../hvirtual/configure --prefix=/usr --enable-x86 --enable-mmx
--enable-freetype2 \
--with-buildinfo=svn \
CFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse' \
CPPFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse' \
CXXFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse'
Though /proc/cpuinfo shows me that I don't have sse3 (which nocona
requires!) so I am not too sure of the stability..
PIerre
Jan Luo wrote:
o.k. is there any way to understand what the bottlenecks on the
hardware side
are. like cpu, hd-speed or ram and so on?
cheers
jan
Nicolas Maufrais wrote:
On Sat, Nov 18, 2006 at 02:24:29AM +0100, Jan Luo wrote:
found the following link in the hdforindies blog with ( in my
understanding ) hd clips:
http://www.siliconimaging.com/DigitalCinema/gallery_footage.html
when i play the scene_1_shot10 clip / MPEG-2 19Mb/s 1080/24P (89MB)
i get frame rates around 17 fps. my box is a dual amd64 4800. can
anyone play these
at 30 fps? on which hardware?
thanks
jan
I got 13fps on my AMD64 X2 4600.
Nicolas.
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
