-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is it possible to have a routing policy that ignores connected interfaces for certain subnets or vlans yet honors others?
Take this example: Vlan 2: 192.168.0.0/24 Vlan 3: 192.168.1.0/24 Vlan 4: 192.168.2.0/24 Vlan 4: 10.1.0.0/24 Vlan 5: 10.1.1.0/24 Vlan 6: 10.1.2.0/24 Let's say that vlan 2 and vlan 4 each have a NAT router to a different provider. I don't wan the vlan 4,5,6 traffic to ever enter the vlan 2,3,4 networks and vice versa. I know I can do a policy map that sets the ip default next-hop but that won't keep vlan 2,3,4 traffic from entering vlan 4,5,6 directly and vice versa. My goal is to completely separate these subnets and vlans as if they were truly in separate routers/switches. Also, in all this, routing between the 192.168.x.0/24 subnets should occur and the same between the 10.1.x.0/24 subnets. Again, just not between the 192.168.x.0/24 networks and the 10.1.x.0/24 networks. I hope that makes sense. Any way to accomplish this within the same chassis? My switch is a 4507 with redundant SUP IV. Thanks, Charlie -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) iD8DBQFGDd8/cGGHuFdGSWARApJ4AJ9lJ1YQhqpWVupwQR+uq435dCzsBgCdF3mI YyRt9RV3y8B+ivqheJnemhY= =JDRY -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
