Hello, I have been using a 7206VXR for many years now to provide DSL Services. We are running this unit utilizing PPPoE. Recently, we attempted to insert a PA-MC-T3 card into the unit and program a Multilink PPP connection for a Customer with 3 T1's bonded together. While the individual serial interfaces went up/down, I could not get the PPP to establish as I believe it was attempting to become PPPoE. I placed ppp username/passwords on each Serial Interface for authentication/authorization with no luck. Does anyone know of a work around for this type of situation?
Current Config: vpdn enable ! vpdn-group 1 accept-dialin protocol pppoe virtual-template 2 ! interface ATM2/0.318 point-to-point no ip mroute-cache pvc 1/318 encapsulation aal5snap protocol pppoe ! interface Virtual-Template2 ip unnumbered Loopback6 ip mtu 1492 no logging event link-status arp arpa arp timeout 0 ppp authentication pap Thank you --Keith -- Keith J. Madara 215-259-2100 Voicenet Network Operations [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
