Hi! > When I add vpnclient management clear to my vpnclient config, then everything > works. Is this a new feature ? One another question. The output of the show crypto isakmp sa has changed. With 6.x, if a tunnel is established, the state were QM_Idle. Now with 7.x it is AM_Active. On an IOS Router it is still QM_Idle.
Now I'am little bit confused. Can someone explain me, why this has changed ? What is the difference between QM_Idle and AM_Active ? Until now I thought, if a tunnel is in active mode, then I have a problem with it. sh crypto isakmp sa Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey) Total IKE SA: 1 1 IKE Peer: 1.1.1.2 Type : user Role : initiator Rekey : no State : AM_ACTIVE Regards, Ahmad -- Ahmad Cheikh-Moussa NetUSE AG Dr.-Hell-Straße, 24107 Kiel, Germany Telefon: +49 431 2390 400 -- Telefax: +49 431 2390 499 Service: [EMAIL PROTECTED] -- http://NetUSE.DE/ Vorstand: Andreas Seeger (Vorsitz), Dr. Roland Kaltefleiter, Dr. Jörg Posewang Aufsichtsrat: Detlev Hübner (Vorsitz) Sitz der AG: Kiel, HRB 5358 USt.ID: DE156073942 Diese E-Mail enthält vertrauliche oder rechtlich geschützte Informationen. Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der enthaltenen Informationen ist nicht gestattet. The information contained in this message is confidential or protected by law. Any unauthorised copying of this message or unauthorised distribution of the information contained herein is prohibited. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/