Don't use subnet mask...... need to use Wildcard. IE>
access-list 100 permit ip host xxx.xxx.xxx.64 yyy.yyy.yyy.yyy 0.0.0.63 Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Stewart Sent: Monday, May 14, 2007 8:37 AM To: [email protected] Subject: [c-nsp] Access-list Question Ok... I know I had a rough weekend but I don't get this.. Creating a new access-list for an interface on a 2621 router: access-list 100 permit ip host xxx.xxx.xxx.64 yyy.yyy.yyy.64 255.255.255.192 I want to permit access from one particular host to the yyy.yyy.yyy.64/26 subnet... When I do a "show run" I see this: access-list 100 permit ip host xxx.xxx.xxx.64 0.0.0.0 255.255.255.192 Why? ;) Thanks, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
