Hi Phil, Thx for replying.
The backdoor route feature i have learned is useful when u want to make MPLS L3 VPN as primary and the alternate link as secondary.but i have a scenario opposite to it. in my case L3 VPN would be secondary. i think i can selectivity change the AD for specific subnets.... Regards, Sanju On 5/13/07, Phil Bedard <[EMAIL PROTECTED]> wrote: > > Selectively setting the distance or using the backdoor route feature > in BGP > may work if you know what routes need to have different distances. > > Phil > > > On May 13, 2007, at 4:09 AM, sanju shastri wrote: > > > HI all, > > > > I have a scenario in which a SP is giving L3 MPLS VPN to client having > > multiple locations. > > > > Now thw client is running EIGRP in his network and EBGP with SP. > > > > > > ON HUB location routes learned by router for remote branches via > > EIGRP is > > having an AD of 90 and learnned from EBGP are having a AD of 20. > > Becasuse of > > same the EBGP routes are given preference in any case. > > > > The client wants to give preference to routeds leaned by local > > EIGRP and > > want to make MPLS VPN link as a failover/secondary. > > > > well I can change AD for the EBGP session but it will reflected to > > all the > > subnet where i want it for some specific subnet. > > > > Is there a way around... > > > > Regards > > Sanju > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > Phil Bedard > [EMAIL PROTECTED] > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
