gokhan senol <> wrote on Wednesday, May 23, 2007 9:05 AM: > hi > i have two 4503 switches that connected eachother via wireless. > both side has their internet connection. but side A has metro > ethernet and what i wanna do is that divert sideB's http traffic to > metroE on side A for that reason i made the config below on sideB > 10.1.1.101 is a JuniperFirewall which terminates metroE connection > on sideA > other traffic which is not http should go out from sideB's internet > connection. > > vlan 20 >> 10.0.1.0 > vlan 10 >> 10.1.0.0 > >[...] > what the problem can be. which parameters should i check > thansk a lot
[...] > route-map traffic permit 10 > match ip address 111 > set ip next-hop 10.1.1.101 (fw on sideA) > > ip route 0.0.0.0 0.0.0.0 10.0.1.101 (fw on sideB) > ip route 10.1.0.0 255.255.252.0 192.168.100.1 Is your next-hop directly connected? Please use a directly connected next-hop, and please use "set ip default next-hop" as a default-route is involved (see http://www.cisco.com/warp/public/105/pbr_cmds_ce.html). oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
