Hi Charles! On May 25, 2007, at 8:45 PM, Jonathan Charles wrote:
> So, I am curious, can you pull a CF card from a 2821 while the router > is up and running? From my point of view this is pretty save. The CF is only needed to store the software image. When the c2821 is already up you may freely replace it by another one (or even let the slot empty :-). I never had a single problem with replacing the CF on running c28xx devices and I did this quite often. Christoph -- CHRISTOPH LOIBL ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ mailto:[EMAIL PROTECTED] |No trees were killed in the creation of this message. http://pix.tix.at |However, many electrons were terrible inconvenienced. CL8-RIPE ++++++++++++++++++++++++++++++++++++ PGP-Key-ID: 0x4B2C0055 +++ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
