thanks - dunno why I couldn't find that on my own. If I anycast 192.88.99.0/24, am I right that the tunnel source must be 192.88.99.1? Or is it some other globally routable interface?
David Prall wrote: > 6to4 Auto Tunnels > http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_configuratio > n_guide_chapter09186a00801d6604.html#wp1048589 > > -- > http://dcp.dcptech.com > > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of matthew zeier >> Sent: Tuesday, June 05, 2007 10:37 PM >> To: cisco-nsp@puck.nether.net >> Subject: [c-nsp] 6to4 relay setup? >> >> Having problems figuring out what I need to configure on a >> Cisco router to make it a 6to4 relay. Any pointers? >> >> I plan on anycasting 192.88.99.0/24 from this router. >> >> thanks. >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
