I don't advise to rely on putting it on the main applying to the subs. Put it on the interface you want it to apply to.
There was some work to do interface groups and interface ranges to make the configuration simpler/easier to apply. R2(config)#interface range ? Ethernet IEEE 802.3 Loopback Loopback interface Tunnel Tunnel interface macro macro keyword I have never played with it too much to know exactly how it's implemented. Rodney On Wed, Jun 06, 2007 at 04:22:14AM -1000, Antonio Querubin wrote: > I'm looking for ways to simplify some large router configs that have many > sub-interfaces either for specific DLCIs, VCs, or VLANs. Is there a > document somewhere that describes which properties or attributes of a main > interface are automatically inherited by its sub-interfaces? So far, > searching the cisco site on 'inheritance' and 'cascade' keywords turns up > only some limited info. In particular I'm looking for ways to apply > certain default policies, ACLs, traffic-shaping, etc. globally to all > sub-interfaces of a main-interface without having to repeat the config for > every sub-interface. > > Antonio Querubin > whois: AQ7-ARIN > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/