Hello all, considering the scenario:
router-AS1 <--> router-AS2 In this AS1 bgp neighbor configuration I have a outbound policy that modify the attributes of routes. In this route-map OUT, I have a instance where I insert a route prepend. When I search for this route using the AS2 looking glass I can see the prepend, but when I issue the "sh ip bgp neighbor x.y.z.w advertised-routes" in router-AS1 I cannot find this prepend. This same behavior is observed in others BGP attributes like metric, local preference, etc. Our support said that the command "sh ip bgp neighbors x.y.z.w adv" show the routes before it cross the outbound policer. But the weird thing is, if in this outbound policy I put a deny instance for don't advertise the route to AS2, the route disappear from the output of command "sh ip bgp nei x.y.z.w adv". Is there a command that shows the routes after it crosses the outbound policer ? Regards, Diogo _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/