Bill, I would have to say if they are dampening you and you are experiencing connectivity problems find out what is going on...(i.e. cable, module, interface, PA, duplex problem maybe I doubt it) Did anything change since the older router such as how the circuit was provisioned to you? It could be the interface on your router though. Also you can route to a loopback interface to ensure it stays in the table....
Otis bill buhlman wrote: > Hi All, > We've installed a new 7609 recently (up 3 weeks) and run BGP to connect to > our upstream provider. We are announcing two prefixes, a /16 and /24. Since > the install I've noticed connectivity to the ISP has gone down for a few > minutes about 10 times, never during business hours. A couple of days ago > this happened during business hours and we found out that our /16 was being > dampend by the ISP due to our router not consistently advertising the prefix. > > In BGP config we have both routes in with network statements and a neighbor > prefix-list out with both prefixes. Also in ip routes we have "ip route > x.x.0.0 255.255.0.0 Null0" which should keep the prefix advertised at all > times as well. I'am running IOS 12.2(33)SRA3 and Cisco cant find any issues > at the moment...can anyone shed some light on this? > > Thx, Bill > > > --------------------------------- > Food fight? Enjoy some healthy debate > in the Yahoo! Answers Food & Drink Q&A. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
