Another interesting side note to the 3560E with DC power... Is you're out
another few hundred dollars because you HAVE to buy it with AC power and
then add DC power into it... Kinda useless for telcos since we'd just want
DC...

I just use ME3400s instead...

On 7/16/07, Tom Zingale (tomz) <[EMAIL PROTECTED]> wrote:
>
> Also,
>
> Yes the 3560 has no DC power but the new Catalyst 3560-E Series offers a
> DC power supply option for the data only (non-PoE) models
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:cisco-nsp-
> > [EMAIL PROTECTED] On Behalf Of Dan Armstrong
> > Sent: Monday, July 16, 2007 6:32 AM
> > Cc: [email protected]
> > Subject: Re: [c-nsp] DC power for 3650
> >
> > AFAIK, there is no DC power option for the 3560.  We use 3550s still,
> or
> > ME3400s when we need DC power.
> >
> >
> >
> > Jeff Crowe wrote:
> >
> > >Hi Paul,
> > >
> > >Yes, you are correct - it is a 3560 switch, not a 3650 unit (it must
> be
> > >Monday morning).  The document at
> > >
> >
> >http://www.cisco.com/en/US/products/ps7077/products_installation_guide_
> cha
> > pt
> > >er09186a008076393e.html#wp1211258
> > >
> > > shows how to install the DC module into a 3750 and a 3560, but it
> does
> > not
> > >mention a part number for that module.
> > >
> > >Jeff.
> > >
> > >
> > >
> > >>-----Original Message-----
> > >>From: Paul Stewart [mailto:[EMAIL PROTECTED]
> > >>Sent: July 16, 2007 9:11 AM
> > >>To: 'Jeff Crowe'
> > >>Subject: RE: [c-nsp] DC power for 3650
> > >>
> > >>If you mean 3560 switch, there is no DC version that I am
> > >>aware of.... 3750
> > >>if you want DC power or at least that's what we use...:)
> > >>
> > >>-----Original Message-----
> > >>From: [EMAIL PROTECTED]
> > >>[mailto:[EMAIL PROTECTED] On Behalf Of Jeff Crowe
> > >>Sent: Monday, July 16, 2007 9:04 AM
> > >>To: [email protected]
> > >>Subject: [c-nsp] DC power for 3650
> > >>
> > >>Hi all,
> > >>
> > >>Does anyone know if there is a DC power module for the 3650
> > >>switch?  If so,
> > >>can an AC model be changed to a DC module via module
> > >>replacement and what
> > >>part number would be needed?
> > >>
> > >>Thanks,
> > >>
> > >>Jeff
> > >>
> > >>_______________________________________________
> > >>cisco-nsp mailing list  [email protected]
> > >>https://puck.nether.net/mailman/listinfo/cisco-nsp
> > >>archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >>
> > >>
> > >>
> > >>
> > >
> > >_______________________________________________
> > >cisco-nsp mailing list  [email protected]
> > >https://puck.nether.net/mailman/listinfo/cisco-nsp
> > >archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> > >
> >
> > _______________________________________________
> > cisco-nsp mailing list  [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to