Hi all, I have a cisco 7200 that's terminating a bunch of DSL customers. These customers are on 10.100.x.x/22 space. I'm doing all nat on the router, ip nat inside on the atm interfaces and ip nat outside on my gateway fast0.
The problem is from the outside the router I can't get to the 10.100.x.x space. When I ping the 10.100.x.x ips I get a reply from one of the nat pool ips, because the packet coming back to me triggers nat as it passed ip nat inside/ip nat outside. ( so I think! ) I installed another fast ethernet, lets say 1.1.1.2, without a nat outside statement and I added a static host route to my workstation, workstation 2.2.2.2/32 to 1.1.1.1 (other side of fast2). In doing this I was thinking that the packets would be coming in on the default interface fast0 and coming out on fast2 (no nat statement) but this doesn't seem to be the case. I also loose connectivity to fast0, can't ping etc, when I add my workstations host route. Basically I'm trying to manage the DSL nat block without it triggering the Nat statements when it comes back to me. TIA, P.A _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
