Oliver Boehmer (oboehmer) wrote: > Well, it really depends on how you want A and B to route the traffic to > C and D. Guess you need to build a full mesh of tunnels (i.e. A-C, A-D, > B-C, B-D, and reverse), and you use a dynamic path option, the tunnels > should follow the shortest IGP path through your network. Then you use > autoroute to steer the traffic over the tunnels, and enable LDP on the > tunnel if you need to send tagged traffic over them. > > > Guess you really need to figure out how the traffic between the pops > should be distributed along the paths, and configure the tunnels > accordingly. If you can't use dynamic, a loose-hop explicit path can > also achieve the desired results.
Many thanks to Oli and Richard. I think I need to put a little more time into planning this particular deployment out. I don't think I have all the details ironed out yet. Thanks again Justin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
