Maybe I'm missing something, but since when did a 1000BaseSX GBIC support single mode? You'll probably need a LX GBIC for this.
Sunet Sysadmin wrote: > Hi all, > > we have a cisco 7200 series router and we want to terminate ADSL layer2 > user on gigabit ethernet. > We have GBIC card in the router and we have 1000Base GBIC SX module. > The network connection is as follows > > Telstra IGR(telco australia)-----------single mode > fibre-------------demarcation point data centre ----------------single > mode fibre flat SC connector --------------- 7200 series router > 1000Base SX module > > The problem is i can't get the interface up and even if i plug/unplug > the single fibre optic the router dowsn't seems be reacting by showing > link up or down. > > The lights on the Gigabit interface keep flashing Tx,Rx,link in > 1,2,3,1,2,3 ---- pattern. > > any suggestions or any help is very much appreciated. > > hadar#show diag > Slot 0: > I/O Controller Port adapter > Port adapter is analyzed > Port adapter insertion time 1d00h ago > EEPROM contents at hardware discovery: > Hardware revision 2.1 Board revision B0 > Serial number 21855274 Part number 73-4093-03 > FRU Part Number: C7200-I/O= > > Test history 0x0 RMA number 00-00-00 > EEPROM format version 1 > EEPROM contents (hex): > 0x20: 01 36 02 01 01 4D 7C 2A 49 0F FD 03 00 00 00 00 > 0x30: 58 08 4A 00 00 10 08 00 00 00 FF FF FF FF FF FF > > Slot 1: > Gigabit Ethernet Port adapter, 1 port > Port adapter is analyzed > Port adapter insertion time 1d00h ago > EEPROM contents at hardware discovery: > Hardware revision 1.0 Board revision A1 > Serial number 22579772 Part number 73-3144-03 > FRU Part Number: PA-1GE= > > Test history 0x0 RMA number 00-00-00 > EEPROM format version 1 > EEPROM contents (hex): > 0x20: 01 98 01 00 01 58 8A 3C 49 0C 48 03 00 00 00 00 > 0x30: 51 02 73 00 00 00 00 00 00 01 FF FF FF FF FF FF > > Slot 2: > Fastethernet (TX-ISL) Port adapter, 2 ports > Port adapter is analyzed > Port adapter insertion time 1d00h ago > EEPROM contents at hardware discovery: > Hardware revision 2.0 Board revision B0 > Serial number 16412105 Part number 73-2618-03 > FRU Part Number: PA-2FE-TX=, PA-2FEISL-TX= > > Test history 0x0 RMA number 00-00-00 > EEPROM format version 1 > EEPROM contents (hex): > 0x20: 01 6C 02 00 00 FA 6D C9 49 0A 3A 03 00 00 00 00 > 0x30: 58 00 00 00 99 12 29 00 00 00 FF FF FF FF FF 00 > > hadar#show ver > Cisco Internetwork Operating System Software > IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(8)T5, RELEASE > SOFTWARE (fc1) > TAC Support: http://www.cisco.com/tac > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Sat 22-Jun-02 16:20 by ccai > Image text-base: 0x60008940, data-base: 0x6173A000 > > ROM: System Bootstrap, Version 12.1(20000824:081033) > [dbeazley-cosmos_e_LATEST 101], DEVELOPMENT SOFTWARE > BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(15)S1, EARLY > DEPLOYMENT RELEASE SOFTWARE (fc1) > > hadar uptime is 1 day, 25 minutes > System returned to ROM by power-on > System image file is "sup-slot0:/c7200-ik9s-mz.122-8.T5.bin" > > cisco 7204VXR (NPE300) processor (revision D) with 122880K/40960K > > > > cheers > phani. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
