Hello, Can anyone advise on this situation?
Topology: Picture a Firewall at the Top of the network, this has 3 interfaces on it. each interface goes to a router (logical) so 2 VRF's and one native routing domain. So theres 3 logical routers, each router has a VLAN on it which is trunked to a switch, that is divided into those 3 vlans...(3 logical switches) If you draw this out it's all separate right. Is this a valid setup? It seems if you dont physically separate each VRF'ed VLAN you get stuck. The switch tries to send the traffic to its native router and not the VRF'ed Vlans, or its default gateway. Theres no way to specify i want traffic to be sent to a different gateway. Although it should send the traffic within its VLAN. I need to be able to logically divide my router, then have vlans within each "router" which are trunked to a switch, which then use each different path to get out. Please advise. Thank you, =============== Dean Perrine E-Mail: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
