Hi All is BGP configuration ok for these scenarios? 1MB and 2MB leased line link 1MB and 1MB leased line link
(also its a v.35 and fastethernet combo) what would be the best setup? Full routes? Def routes? Here's the show version of the router I will be using. can it support BGP? ===== Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3f), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 18-Aug-06 18:47 by alnguyen ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) gw-oberoi-bng-in uptime is 19 weeks, 8 hours, 7 minutes System returned to ROM by reload at 08:26:42 UTC Sun Mar 18 2007 System image file is "flash:c2800nm-ipbase-mz.124-3f.bin" Cisco 2851 (revision 53.51) with 251904K/10240K bytes of memory. Processor board ID FHK103670G9 2 Gigabit Ethernet interfaces 2 Serial(sync/async) interfaces DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 ===== regards, chris _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/