I have put an ME6524 (s6523-advipservicesk9-mz.122-18.ZU2.bin) in to replace a 7200 and one of the interfaces has a rate-limit. When I do a "show int rate-limit" I see:
GigabitEthernet1/1.460 Input matches: access-group 100 params: 144696000 bps, 1048576 limit, 1048576 extended limit conformed 0 packets, 0 bytes; action: transmit exceeded 0 packets, 0 bytes; action: drop last packet: 1573927164ms ago, current burst: 0 bytes last cleared 00:51:24 ago, conformed 0 bps, exceeded 0 bps Output matches: access-group 101 params: 144696000 bps, 1048576 limit, 1048576 extended limit conformed 0 packets, 0 bytes; action: transmit exceeded 0 packets, 0 bytes; action: drop last packet: 1573927164ms ago, current burst: 0 bytes last cleared 00:51:24 ago, conformed 0 bps, exceeded 0 bps I know there is traffic that is matched by the acl, is this config supported? Should I convert this to a policy map? Thanks, Jay _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/