Hello We have a GSR12008 and we just inserted a single 3 port GigE card. Since insertion i keep getting this error %ENV_MON-2-TEMP: Hotpoint temp sensor(slot 2) temperature has reached CRITICAL level at 70(C) I have searched the doc's and the all point to this:
Error Message %ENV_MON-2-TEMP : [chars] temperature has reached [chars] level at [dec](C) Explanation The temperature sensor specified has reached a warning or critical level and has reached or exceeded a condition that is outside its acceptable range. Recommended Action Attempt to resolve the temperature problem. If the problem cannot be resolved, contact your Cisco technical support representative for assistance. here is the environmental output cr.nyc2.ny# show environment temperatures Slot # Hot Sensor Inlet Sensor (deg C) (deg C) 1 55.5 41.5 2 71.0 41.0 3 59.5 44.5 4 59.0 45.5 6 56.5 43.0 7 53.0 42.5 Does anyone have a suggestion? Thank Chris Lane -- //CL _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/