For 5 to 20Mbps you can use IOS SLB that is available in the 7200 and 6500. Use it in dispatch mode so only connections to the servers are load balanced and return traffic is sent directly by the server via a loopback using the VIP. You'll have to check Feature Navigator to confirm where it is supported. I believe it is also on the 3800's. The Local Director can do dispatch mode as well, but not being supported anymore I would look at something more recent.
David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Adam Greene > Sent: Thursday, September 06, 2007 2:09 PM > To: [email protected] > Subject: [c-nsp] hardware load balancer? > > Hi, > > We're looking to serve up some live flash media streams in a > highly available way, by deploying a couple of flash media > servers behind a hardware load balancer. > > We do have a Cisco LocalDirector 416 acting as a boat anchor. > We'll need to support anywhere from 5-20 Mbps in the short > term through the device. > > Not sure if we should try using the LocalDirector or look at > another Cisco option, or just try a Foundry or F5 solution. > > Thanks for any feedback, > Adam > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
