Thanks. The manual also says to power them with 30 A circuits. Of course, that's not actual draw.
I was hoping someone was going to say that Cisco has this bit of hidden documentation that it's just 13 A per 3845 for 48 VDC fed DC power supplies, whether you have one or two of them. But no one has said so, so we need to budget 26 A. =( Frank -----Original Message----- From: Justin Shore [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 11, 2007 6:55 PM To: [EMAIL PROTECTED] Cc: [email protected] Subject: Re: [c-nsp] DC powering for 3845 router I'll take my DC amp meter to work tomorrow and check our 3845s. I have 3 that are DC powered. Justin Frank Bulk wrote: > Our installers are balking at the 19 W requirements, per DC power supply, > for the two 3845 routers we purchased. Since we have a redundant power > supplies, it looks like a total of 4 power supplies totaling 76 W. > > Are there any shortcuts here? The documentation, both online and printed, > is pretty sparse about the dual-power supply situation. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
