Adrian Chadd wrote: > On Fri, Sep 21, 2007, stevek wrote: >> I am sure someone somewhere has asked this before: >> >> Is anyone familiar with a way to deploy a per-session rate-limit on the >> 7200 platform? I have a number of 7200s which are attached to campus >> networks and we are looking to limit per-user or per-session traffic. I >> know this can be done with the Broadband Aggregation Enhancements >> released last year, but this only seems to apply if you are running >> PPPoE - everything we have is straight ethernet. >> >> Any suggestions or ideas would be appreciated. > > Can you define session then? > A communications connection between two network nodes. At this point, I am not concerned about multicast. If limiting, policing, etc, cannot be accomplished per session then per host would probably work -- if hosts can be defined dynamically,
-- ------------------------------------ Steven Kent Chief Technical Officer onShore Networks http://www.onshore.com fingerprint: pub 1024D/D2779F66 2004-04-07 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/