post your vpn config what code are you using?
On 9/22/07, Lyndon Tiu <[EMAIL PROTECTED]> wrote: > > Hi guys, > > I have a PIX 515E. > > I setup the PIX as a PPTP VPN server accepting PPTP connections from the > outside. I have a Windows XP client on the outside connecting to the > internal network using the PIX as the PPTP server. > > I followed instructions setting up the VPN and the Windows client is > able to connect to the PIX and obtain an ip from the ip pool. > > Problem is, the Windows client is unable to do anything after this. It > cannot ping any other machines on the network. > > I believe this is a routing issue. Can someone on this list confirm if > routing is something I have to do separate from the VPN configuration? > > Ipconfig says that a default gateway is not assigned to the Windows > client by the PIX through the PPTP VPN. Route /print shows no routes > added by the PPTP. I do not see any PPTP VPN configuration that allows > me to setup routes. > > > -- > Lyndon Tiu > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
